Visobath bathroom furniture installation

Discover how to install a suspended bathroom cabinet in an easy and simple way. The first steps to install a bathroom cabinet are essential to avoid possible misalignments of the drawers, from Visobath we have prepared a small summary with 8 simple steps to follow to ensure that you enjoy your bathroom cabinet from the first moment.

Tools you will need:

Protective gloves, drill with 8mm drill bit, pencil, hammer, tape measure, screwdriver, level and silicone gun.

Installation:

1º Protect the surface where the furniture will be placed.

2º Remove the drawers.

– Metal drawer (Nomad, Decor (Atira)):

– Partial ext. drawer (Eleven, Box, Bondi, Pomegranate):

– Total ext. drawer (Kyoto, Vision, Scala, Arco):

– Iron drawer (Bari, Icon):

3º Make the measurements on the wall. Normally it is recommended to install suspended furniture at a height of 85-90cm. Depending on the height of the person, it should be in a comfortable position for use.

4º Once the height is decided, mark the holes to fix the plates. Drill the holes with a drill and an 8mm drill bit according to the material of the wall surface. Insert the plugs in the holes and screw the plates.

5º Hang the furniture on these plates.

6º Level the furniture. Place a level on the front, back, fronts and sides. If it is not level, the Scarpi hanger is ready to be leveled in all directions. This step is fundamental to ensure a good installation of the furniture, be sure to check the correct leveling.

7º Once the cabinet is completely level, seal the sink.

You can see the summary of these 7 steps in the following video:

8º Place the drawers and adjust them if necessary. You can see the drawer adjustment video for each Visobath range:

- Partial extraction (adjustment without front linkage):
  - - Series: Eleven, Box, Bondi, Pomegranate
- Total extraction (adjustment with front hitch):
  - Series: Kyoto, Vision, Scala, Arco